Board index Roller Coaster Games Hard Hat Area Cobalt-(Intamin Mini Hyper)

Cobalt-(Intamin Mini Hyper)

The Hard Hat Area is the place to post construction news about your ride, so this is the place to hype your future upload!

Post September 24th, 2005, 12:07 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA

Post September 24th, 2005, 12:46 pm
hyyyper User avatar
True Addicts
True Addicts

Posts: 8705
Points on hand: 9,207.00 Points
Location: The Netherlands
btw, the pic of the helix, the connector tubes that run from the angled supports to the footers (on the inner circle) should be thicker, now the weight is pushing on those little beams, they should be the same size as the angled ones, or maybe thicker if there are high G's

Post September 24th, 2005, 12:49 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA
But the supports look like crap if I make those beams bigger. I might lower the connection point with the small vertical tubes.

And if you want tube sizes, the angled tubes and the ones that come out of the footers are both size 3. So there is no difference in size. It may appear that way because my screenie is not the best.

Post September 24th, 2005, 12:51 pm

Posts: 3018
Points on hand: 2,931.00 Points
Location: USA
Are you gonna use the generic station or are you gonna make one on your own?

Post September 24th, 2005, 1:20 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA
Just a small update. After flanging the track I've decided that I like the supports better when they are unflanged. The flanges came out looking really bad. Supports are done and pics should be up later.

Post September 24th, 2005, 1:26 pm
hyyyper User avatar
True Addicts
True Addicts

Posts: 8705
Points on hand: 9,207.00 Points
Location: The Netherlands
Originally posted by Woodie Man

But the supports look like crap if I make those beams bigger. I might lower the connection point with the small vertical tubes.

And if you want tube sizes, the angled tubes and the ones that come out of the footers are both size 3. So there is no difference in size. It may appear that way because my screenie is not the best.


now that you mention it, yes, perhaps making then thicker or the other ones thinner, but, it's your coaster, do want you can leave undone

Post September 24th, 2005, 5:01 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA
I'm going to stick with the supports the way they are. I'm adding trees right now and maybe I'll add a small pond or something. Pictures will be up after this and then the ride will be up on the 26th for the contest.

Post September 24th, 2005, 5:20 pm

Posts: 3018
Points on hand: 2,931.00 Points
Location: USA
whoo hoo! btw you still never answerd my question.

Post September 24th, 2005, 5:26 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA

Post September 27th, 2005, 12:28 am

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA

Previous

Return to Hard Hat Area

 


  • Related topics
    Replies
    Views
    Last post
cron