Rita Queen of Speed [pg 5]

if the pinnacle is the top then they are not under each other. From photos ive seen they are pretty far off. The black segments of the second hill doesnt even start until its right past the first pinnacle from the above view. The ride length is pretty darn close, and my heigth is only 2 inches, or 5 cm off. It feels tight to me, and the ride time is right about the same from start of launch to hitting the first brakes. I know its not prefect, but hey, its all my ablility is allowing me to do. There really isnt one full POV out there, but ive seen one that shows the entries of the hills, so i banked off of that and waht JPE has said. when it goes up the hill, it kinda unbanks. So i kinda did that on mine.

Update l8r

like i said supports are done, and they have been completely changed from 3 bar to 2 bar. Now im going through and removing all the old flanges so they can be replaced with new ones. Wingover, 3ds will come dead last. If anyone would ever consider do any of them for
points, here are somethings you could do.

COntrol tower- red rectangle with windows and a roof

Q line - bambooish walls

Half a tire with the rita logo on it. I have logos.

Path around the rita area

Unload platform- metal sides with medal top even with the track and yellow lines, and an exit stairs

Track storage building

If anyone would do any of these then i can give you some phots of the areas.

well since obviously no one wants to do 3ds, theres 3 things to do.

1- im getting help with the cartexture
2- trees need to be placed
3- i need someone that can transfer the superwribel track that comes with the game into a 3d so i can use it as corkscrew

i hope not too long before a release!

I can export the track to use as corkscrew if you like. PM me if you're interested.

Thanks to WingOver for the awesome cork 3d. Sence no one else offered to do 3ds ill just wait for the cartexture and prelly upload. I think the ride looks pretty kick ass in the light fog environment, but which environment do you all think is most like alton towers, or UG land?

http://nldc.interfix.net/p1428

Looks nice, the 3d corkscrew looks nice also.

man i really wished someone would do 3ds for this cause it looks awesome

If you want i could make the paths for you, so long as i have a layout of how they go pm for a better explanation.

Like I said in the PM, a custom envo would be best, some fog but not as much as the one you've got there. Also, in this screenshot:
http://nldc.interfix.net/i9590
the 4 tube track doesn't need to extend that far around the turn, it should switch to 3 tube just before it reaches the full banking at the end of the leadin.

ok^ will fix that. Cork has been positioned better now and im fixing the support by its turn. When i flange it will restart so i'll fix the 4 tube problem there.

alright guys so far i have the corkscrew 3d, paths done, an enivronment, a sign is nearly completed, and the cartexture is close to being done. The only things i really need now are:

a wood fence, around 4 ft tall(for q line)

stairs for the station and exit

The only thing some one could possibly do is custom station work. If anyone would be interested PM and i will return the message with what i want! Thanks to WingOver, jpecool, darkx199, and Forcination Nation!

it looks very accurite to the pictures i can find of it

can't wait to ride it

its 199 at the end there.

Well hear are some pics of the 3ds.
Paths by Darkx199
Sign by Forcination Nation
Corkscrew from WIngover (Envo-made by Wingover, edited by me)
Cartexture- By jpecool and me

Purple train in middle of paths- http://nldc.interfix.net/i9726

Blue Train by Corkscrew- http://nldc.interfix.net/i9727

Blue Train Over 2nd hill- http://nldc.interfix.net/i9728

Overview in Environment- http://nldc.interfix.net/i9729

Overview in white envo- http://nldc.interfix.net/i9730

Sign with train in backround- http://nldc.interfix.net/i9731


I Still Need A Wood Fence and Someone to add in station stairs!

And lastly, and the last thing that i could have, is a two steel stationw without roofs and one with the luanch tower.

N'joy!

looks kool, did u ever think bout makin that station thing out of supports yea it might be brown but o well

the coaster looks awsome and the layout looks dead accurate and also it looks like your corkscrews are greatly improving and rita looks insanly smooth and the supports look awsome good work i cant wait until you upload it keep it going! also the 3ds look awsome too[:D]

Looking forward to seeing this one but.....a question....
How did you do the corkscrew coaster as a 3ds?It's curious and cool![;)]

I believe you can do transfer any track file to a 3d file using a registered version of the construction kit. I dont have it, so WingOver nicely volunteered to help out as i guess he had a registered version.

I found someone to do the fence, so i just need some stairs.

I see....really nice but I dont have it too...Otherwise I like creating objects...how have these stairs to be?

one just has to be a straight stair from the exit platform down to the path. the one into the loading station is gunna have to go as a right angle, so halfway up, turn left, halfway up.