NoLimits Auto Flanger

I have a quick question concerning the NoLimits Auto Flanger. Why does my terrain get messed up and turn into mostly water after I send my track through the auto flanger? If you have an answer or suggestion to help I would really appreciate it. Thanks.

I'm not really sure why, and i have the same problem, but what i usually do is just slightly raise the parts that are water. It doesnt take very long, and it works for me.

[Dirk_Ermen]

The only trick to solve it is just raise the water a slight bit with the terraformer after you've applied the tool. Just go into the terraformer and press raise terrain, fill in like 0,1 and the water should be pretty much gone now.

[hyyyper]

hmmm...you can better raise everything before flanging. Track, supports, scenery and terrain should be raised by like 1 meter (3 feet) and then apply the flanger. If you first flange and then raise the terrain some of the flanges will miss the support because of the small change in angle in the supports

Or you could Load up your not flanged track in the Terraformer, flange the track, save it as something else, then open it back up in the terraformer but when it asks you if you want to replace the terrain say no. Wala.