Board index Off Topic Board Off Topic Discussion school project, any ideas?

school project, any ideas?

Here, anything goes. Talk about anything that you would like to talk about!

Post October 25th, 2007, 4:34 pm

Posts: 386
Points on hand: 120.00 Points
Location: NJ, USA
i have to make a Rube Goldberg project for my science class.

( if u dont know what it is click http://www.youtube.com/watch?v=DtVkzgKObv0

note: the video above is far more then i need, below are deatails from the sheet we recieved.



your rube goldberg machine could do one of the following:
- begin by droping a marble into the machine and end it having the marble ring a bell
- begin by droping a marble into the machine and end by burstin an inflated ballon
- begin by dropping a marble into the machine and end by squeezing toothpase out of a tube.

you may choose a diferent talk but have it aproved by teacher.

Your machine needs to include a minimum of 5 different steps from start to finish, each step utilizing some principal of physics ( newtons laws, simple machines) it needs to be small enough to fit in the class room.(and prob bus. i dont get driven) the task should be completed in less than 3 minutes.

you MAY NOT use flames, chemicals etc. do not include offencive material or themes. no electric, live animals, or electronic equipment.


your machine should be constructed from materials you scrouge from home. the total cost for your machine should not exceed $5-$10. you should plan to put the pieces toghter with nails, screws, brackets, wood glue,or hot glue; not tape. the final product should be sturdy and transportable. possible materials: rubber bands, paper towel rolls, mouse traps(spring kind) rulers with grooves, parts of old toys, parts of plastic milk jus, soda bottles, straws, popsicle sticks, scraps of wood, foam board, bottle caps, etc.


any ideas of a simple yet good idea?

Post October 25th, 2007, 4:46 pm

Posts: 1936
Points on hand: 7,125.00 Points
Location: orlando

darn, i wish we did that in school :(, sounds like a lot of fun, sorry, no ideas, but im thinking...

Post October 25th, 2007, 4:51 pm

Posts: 386
Points on hand: 120.00 Points
Location: NJ, USA
does sound fun, the un fun part to me is.

brining it in, setting it up, getting in front of class explaining junk haha

Post October 25th, 2007, 4:53 pm

Posts: 3185
Points on hand: 3,780.00 Points
Location: USA
If you want the marble to roll like a coaster, you can use foam pipe insulation.

Also, there's this great image of a machine like this in an I Spy book.

Post October 25th, 2007, 5:07 pm

Posts: 451
Points on hand: 1,151.00 Points
Location: Lafayette, IN, USA

$5-$10? Well, that eliminates anything really fun ;) Actually, I was going to suggest that you go the balloon route, but fill it with hydrogen and use a flame, but then I saw that you aren't allowed to use fire (probably for good reason with the way some kids are).

The possibilities, even with simple machines, are endless, but if you're looking for some inspiration, I know that Purdue hosts a annual Rube Goldberg contest: http://www.purdue.edu/UNS/rube/rube.index.html

Have fun!

Post October 25th, 2007, 5:23 pm

Posts: 2748
Points on hand: 4,830.00 Points
Location: Medinah, Il, USA

I did this last year and we had to pop a balloon. What I did is (If you have the height) I took two cups and tied them together with string and one was weighted. when the marble dropped in the non-weighted cup there was a pin in the bottom which when the cup dropped popped the balloon.

Post October 26th, 2007, 1:03 pm

Posts: 325
Points on hand: 2,268.00 Points
Location: Chula Vista, California, USA

Huh, just use stuff from your garage to build it. You can also get stuff from a hobby shop or from a craft store to make it. Foam board usually would work for a lot of stuff, such as track. Your best route would be to go with either the toothpaste or the bell option. Roll the marble through some track, which activates another marble that dropes into the track, then acivates another marble that goes into a tube, spiraling towards the next marble that gets knocked onto the next section of track, which in turn leads to another marble that either A.) drops down a straight tube onto the tube of toothpaste, or B.) just rings a bell. Should work, if you build it correctly. Hot glue, a sharp kitchen knife, foam board, some straight and/or curved tubing, and time to work. If you can use your own marbles, then buy the heavy ones. There are ones that come in some of those bean toys that weight like 5-6 ounces.
Hates oscar for taking points...

Post October 26th, 2007, 4:07 pm

Posts: 868
Points on hand: 4,391.00 Points
Location: Indianapolis, IN, USA
Yeah Purdue is pretty crazy when it comes to their obsession with Rube Goldberg. My advice is to use old toys you might have. Knex, legos, stuff like that would be an easy way to assemble structures. I'd go with popping the balloon too.

Post October 26th, 2007, 11:38 pm
hyyyper User avatar
True Addicts
True Addicts

Posts: 8705
Points on hand: 9,207.00 Points
Location: The Netherlands
did something similar 2 years ago, we needed to make a 'stamper', and we had to use at least 20 steps. It's really easy, if you start from the end and design your way back to the beginning
Image

Post October 27th, 2007, 1:18 am

Posts: 175
Points on hand: 2,978.00 Points
Location: boston, ma
That's not enough $ for materials. I was gonna suggest using pvc pipe to run the marbles. Tose videos were really cool, but the music was annoying as HELL.

Post October 27th, 2007, 4:24 am
Dirk_Ermen User avatar
True Addicts
True Addicts

Posts: 13387
Points on hand: 2,180.50 Points
Bank: 45,000.00 Points
Location: Noord-Brabant, Netherlands
try this:

[youtube]lCYg_gz4fDo[/youtube]

[lol]
Coastercount: 1410 (I've seen the world and it's horrid contraptions... @.@)
- Wood: 142
- Steel: 1268

Post October 27th, 2007, 5:00 am

Posts: 1674
Points on hand: 196.00 Points
Location: Zelezniki, Slovenia

^[lol][lol][lol]
That's like SO awesome!

Anywho, I wish we'd do something like this in school! I suggest you use something like Lego bloscks or K'nex or something like that in connection with old toys and scrap materials...

Post October 27th, 2007, 4:54 pm

Posts: 386
Points on hand: 120.00 Points
Location: NJ, USA

Post October 27th, 2007, 5:07 pm

Posts: 1460
Points on hand: 929.00 Points
Bank: 2,385.00 Points
Location: Scottsdale, AZ, USA
Yeah, I've seent that before. Mythbusters is so awesome!


Return to Off Topic Discussion

 


  • Related topics
    Replies
    Views
    Last post