I NEED HELP

i need help building a coaster with no limits. i have tried many times but when i test the ride the car goes in the opposite direction of the lift hill.can anyone plz help me with the problem?

Thats because when you add your segments, you are using Add Vertex and Segment (before start). Thats going reverse. You need to use Add Vertex and Segment (To End) if you are building forward.

Ill simplify it. Pull up the nl editor. See towards the top left the mouse that should be selected? Well When adding track what you probabally do is put your stationg with the button two buttons right of the mouse (add vertex and segment before start). Well for the station thats good but when adding other segments you want to select the button one left of that (add vertex and segment to end). Try that and see if that works.

Originally posted by B and M

Ill simplify it. Pull up the nl editor. See towards the top left the mouse that should be selected? Well When adding track what you probabally do is put your stationg with the button two buttons right of the mouse (add vertex and segment before start). Well for the station thats good but when adding other segments you want to select the button one left of that (add vertex and segment to end). Try that and see if that works.

That was not simplified. You said nonsense stuff there. Unless I'm just really bad at interpreting things.

^I don't see you trying to help.

Use the track with the blue node (NOT the one with the blue node and purple triangle) to build tracks.

OR double click on the station, and check the box that says reverse cable lift. I am assuming you are building a shuttle coaster. You will need to set the passes to 2 if you want it to go back through the station and through the layout.

Originally posted by devilsrule911

Originally posted by B and M

Ill simplify it. Pull up the nl editor. See towards the top left the mouse that should be selected? Well When adding track what you probabally do is put your stationg with the button two buttons right of the mouse (add vertex and segment before start). Well for the station thats good but when adding other segments you want to select the button one left of that (add vertex and segment to end). Try that and see if that works.

That was not simplified. You said nonsense stuff there. Unless I'm just really bad at interpreting things.

To get it you had to have the editor open. Its the best step by step i could offer.

Hey everybody I'm pretty new to No Limits. I've been learning a little here and there, and I keep hearing people talking about the g's not going into the red, what exactly does this mean, and how can I check the tracks I've made? Thanks a lot for any help.

Up in the bar at the top in the simulator, try to keep the G reading next to "vert" in between 5.5 and -1.5 with those being extremes (there are a few exceptions to the rule with recreations of a certain style but I won't go into the specifics.). Also try to keep the reading next to "lat" in between 1.5 and -1.5. When you get past those readings the color of the number will go yellow or red, hence "red Gs."

Thanks a lot! I love this program but it's a little complicated when you're just getting started. Thankfully there are friendly people and forums like this.

Pretty much its just when the forces are too high and it would injure the riders. If it was 2 lats it would definitely hurt someone.

That's what I thought. There's a lot to this game and unfortunately not a lot of examples and tutorials some with it.