Tiger Terror Recreation

I started making a recreation of the Tiger Terror at Safari Land, the best indoor coaster in Illinois, and probably the best coaster built by Wisdom Rides:


Image Insert:

228.59 KB


It's going to have a building and full scenery when complete.

http://www.rcdb.com/1628.htm?p=4750 Your lower upwards ramp under the first drop needs to be straight.

Good Observation. How does this look?


Image Insert:

257.01 KB

And by the way, I am using both the rcdb page and this one as a reference:

http://www.themeparkreview.com/parks/ph ... inkid=2246

Maybe the upward ramp could have a tiny steeper upwards slope? Or is the angle of the picture? And it looks like the airtime hill could be a little bit steeper and tighter.

Maybe this is a better spot to compare:


Image Insert:

188.18 KB

It looks very accurate IMO.

Here are the supports so far:

Image Insert:

241.79 KB

I fixed the layout:

Image Insert:

255.73 KB

How?

^I put the drop on slight angle to the left for support accuracy reasons. Here are the supports so far:

Image Insert:

259.33 KB

Those supports look very Wisdom like.

Almost done with the supports!

Image Insert:

242.11 KB

Did you make it do 2 circuits?

^is that possible? btw, thanks for the comments!

Supports complete AND finished the cartexture!!!

Image Insert:

200.27 KB

Cool5 V2!!!!

^umm, no. Look at all of my tracks, and look at all of his, and compare. The Tiger Terror is actually a great ride if you ask them to run it full speed (via the tire on the drop), which is how it will be in my recreation.

[gouldy]

In all fairness, there is a big difference here between you and cool5. Although the ride you've picked to recreate may be called into some question, this recreation looks very good. The supports that you've done are really really decent. You're obviously going into a good amount of detail too, especially with that cartexture, that looks great.

Whereas Cool5's rides tend to look like a bag of sh*t

seroiously, who cares if Joney Richey posts a recreation of a kiddy coaster?
i think its great.

this site needs more smaller rides.(exceptions of cool5's rides) most of the posts on this site are huge intamins. i like the creativity shown in this ride as well.

Originally posted by Jonny Richey

^is that possible? btw, thanks for the comments!

Yes it is very much possible, save all the track as an element, and add it in to make *two circuits*
x

^I totally forgot about that method! I might try that.

But anyways, with the tire on the first drop running at full speed, This is definitely on the border line between kiddie coaster and thrill coaster. I may also be because this is the only coaster I will ride most of the winter besides Mall of America.

Can you make the black ceiling girders, the silver ventilation pipes, the jungle animals and wall graphics? The floor has jungle graphics also.

^NO HE CAN'T!


Actually he probably will but that's beside the point.

^[lol] yeah, I plan to make those. Here is the layout for the building:

Image Insert:

246.87 KB

wow nice i was actually making a costom indoor kiddie ride in no limits. this recreation looks really accurate.