Board index Public Relations Contests Compact B&M Hyper - Results Page 7 Bottom

Compact B&M Hyper - Results Page 7 Bottom

Only official CoasterCrazy.com Contests are posted here.

Post November 22nd, 2009, 2:08 pm

Posts: 1580
Points on hand: 2,736.00 Points

Post November 22nd, 2009, 2:29 pm
Tetsu Premium Member
Premium Member

Posts: 2244
Points on hand: 44.00 Points
Bank: 4,333.00 Points
Location: Winchester, VA
Originally posted by Stealthrider5583

does it HAVE to be over 200 ft? or can it be lower like hollywood dream


It can be lower.

Originally posted by devilsrule911

Can we make a 90 degree lift?


Yes.

Originally posted by A113

Can track go within the red x?


So long as it is over 30 feet.

Originally posted by slosprint

Just to clarify, the deadline is in eastern standard time?


Yes.

Originally posted by slosprint

and also is part of the station allowed to be outside the template as long as the track is inside?


Yes.

Originally posted by A113

Wait is it -2 or -0.2?


-2

Post November 22nd, 2009, 2:45 pm

Posts: 1674
Points on hand: 196.00 Points
Location: Zelezniki, Slovenia

Some pretty weird rules...
But I'm in, sounds fun!

Post November 22nd, 2009, 4:14 pm
slosprint User avatar
Premium Member
Premium Member

Posts: 3649
Points on hand: 5,728.00 Points
Location: MA, USA
i've already started. i've decided not to use tools even though it makes it extremely hard to keep the Gs in check on something this big with such a small area to work with.
Boulder Dash was the only good roller coaster.

"or if you're when the hydraulic fluid was dumped out of the motor is goes 200ft up the tower and is like "LOL nope"" - CKMWM 2016

Post November 22nd, 2009, 6:11 pm

Posts: 94
Points on hand: 1,505.00 Points

Post November 22nd, 2009, 6:51 pm

Posts: 655
Points on hand: 2,333.00 Points
Location: Minnesota, USA
I think I'll give it a go.

Question: It states "NO supports on the area marked with a RED "X". Does that mean supports can't even go over that area or just can't be touching ground?

Post November 22nd, 2009, 6:59 pm

Posts: 134
Points on hand: 155.00 Points
Those brake segments are a killer. Most compact coasters use the transfer segment as the holding block.

Post November 22nd, 2009, 7:32 pm
slosprint User avatar
Premium Member
Premium Member

Posts: 3649
Points on hand: 5,728.00 Points
Location: MA, USA
what is the diffeence between the section with an x through it and the purple box?
Boulder Dash was the only good roller coaster.

"or if you're when the hydraulic fluid was dumped out of the motor is goes 200ft up the tower and is like "LOL nope"" - CKMWM 2016

Post November 22nd, 2009, 9:05 pm
Dirk_Ermen User avatar
True Addicts
True Addicts

Posts: 13387
Points on hand: 2,180.50 Points
Bank: 45,000.00 Points
Location: Noord-Brabant, Netherlands
Originally posted by slosprint

what is the diffeence between the section with an x through it and the purple box?


It took me a couple of times to read the difference. But I think there can't be any supports at all in the red X box, but no supports under 30ft in the purple box.

Can you confirm if this is correct or not?
Coastercount: 1410 (I've seen the world and it's horrid contraptions... @.@)
- Wood: 142
- Steel: 1268

Post November 22nd, 2009, 9:38 pm
slosprint User avatar
Premium Member
Premium Member

Posts: 3649
Points on hand: 5,728.00 Points
Location: MA, USA
so no supports can cross over the x section no matter what the height?
Boulder Dash was the only good roller coaster.

"or if you're when the hydraulic fluid was dumped out of the motor is goes 200ft up the tower and is like "LOL nope"" - CKMWM 2016

Post November 22nd, 2009, 10:09 pm
Dirk_Ermen User avatar
True Addicts
True Addicts

Posts: 13387
Points on hand: 2,180.50 Points
Bank: 45,000.00 Points
Location: Noord-Brabant, Netherlands
Originally posted by slosprint

so no supports can cross over the x section no matter what the height?


I think so... Now it's waiting for Tetsu to confirm me or correct me... [lol]
Coastercount: 1410 (I've seen the world and it's horrid contraptions... @.@)
- Wood: 142
- Steel: 1268

Post November 22nd, 2009, 10:16 pm

Posts: 1820
Points on hand: 5,394.00 Points
Bank: 1,660.00 Points
Uh... I'm pretty sure you can have supports cross over the red X...
Oh, were you expecting something here?

Post November 22nd, 2009, 10:38 pm

Posts: 2252
Points on hand: 5,889.00 Points
Location: Illinois (SFGAm), USA
The braking requirements are confusing. Can you label this picture just to clarify?

http://www.rcdb.com/4253.htm?p=23275
American Eagle Lover

Post November 22nd, 2009, 10:44 pm
Turbo User avatar
Moderator
Moderator

Posts: 3771
Points on hand: 5,516.00 Points
Bank: 21,857.68 Points
Location: WA, USA

hmmmm, 1 month isn't much time, but i have a good idea already. count me in
Coaster Count: 582 // Top Five: 1. Helix 2. Nemesis 3. Big Bad Wolf 4. Boulder Dash 5. Balder

Coasterkidmwm wrote:
4 G's to the taint was a bit much for me because I'm not a power bottom like Turbo

Post November 22nd, 2009, 11:19 pm
slosprint User avatar
Premium Member
Premium Member

Posts: 3649
Points on hand: 5,728.00 Points
Location: MA, USA
so far i've got a peice of crap ride that is 220 ft tall, only has a 150 ft drop and the wierdest slinky-helix thing i have ever seen in my life. it is an original element, so i think i'll call it a "get-rid-of-speed-in- a-small-area-peice-of- no- good-turnaround-dirtimonkey" it looks cool and hidious at the same time.
Boulder Dash was the only good roller coaster.

"or if you're when the hydraulic fluid was dumped out of the motor is goes 200ft up the tower and is like "LOL nope"" - CKMWM 2016

Post November 22nd, 2009, 11:46 pm
Turbo User avatar
Moderator
Moderator

Posts: 3771
Points on hand: 5,516.00 Points
Bank: 21,857.68 Points
Location: WA, USA

So far i have an o.k. ride with 2 lift wraparounds. 153 ft tall i think and it will be VERY compact
Coaster Count: 582 // Top Five: 1. Helix 2. Nemesis 3. Big Bad Wolf 4. Boulder Dash 5. Balder

Coasterkidmwm wrote:
4 G's to the taint was a bit much for me because I'm not a power bottom like Turbo

Post November 23rd, 2009, 12:16 am

Posts: 1908
Points on hand: 232.00 Points
Location: USA
Originally posted by Oscar

Wwwaaaaaaaaaaaaaaaaaa it can't be done!!! [lol]


Juat like you and the Tight Fit contest.

Bwhahaha.
Originally posted by GerstlCrazy:
The more time I spend on this website adds more to the impression that this has become a daycare.

Post November 23rd, 2009, 12:36 am
Turbo User avatar
Moderator
Moderator

Posts: 3771
Points on hand: 5,516.00 Points
Bank: 21,857.68 Points
Location: WA, USA

^lawl
Coaster Count: 582 // Top Five: 1. Helix 2. Nemesis 3. Big Bad Wolf 4. Boulder Dash 5. Balder

Coasterkidmwm wrote:
4 G's to the taint was a bit much for me because I'm not a power bottom like Turbo

Post November 23rd, 2009, 12:40 pm

Posts: 246
Points on hand: 685.00 Points
Location: Beaumont, TX, USA
count me in im up for a challenge.
i put the laughter in manslaughter!

Post November 23rd, 2009, 12:44 pm

Posts: 937
Points on hand: 829.00 Points
Location: Leeuwarden, Netherlands


Post November 23rd, 2009, 1:16 pm

Posts: 246
Points on hand: 685.00 Points
Location: Beaumont, TX, USA
can we have a turn before the drop but after the lift? or a turning drop?
i put the laughter in manslaughter!

Post November 23rd, 2009, 1:19 pm
hyyyper User avatar
True Addicts
True Addicts

Posts: 8705
Points on hand: 9,207.00 Points
Location: The Netherlands
Originally posted by 19121

can we have a turn before the drop but after the lift?


no!, the entire coaster must be 1 huge straight line!!
Image

Post November 23rd, 2009, 1:27 pm
gouldy User avatar
Premium Member
Premium Member

Posts: 7827
Points on hand: 3,634.00 Points
Bank: 25,088.00 Points
Location: WOLVERHAMPTON, England.


Post November 23rd, 2009, 2:53 pm

Posts: 246
Points on hand: 685.00 Points
Location: Beaumont, TX, USA
Originally posted by Tetsu


- No structure my exceed 230 feet in height.

- Lift hill speed my NOT exceed 10 MPH.

- No track my be outside the template.

- Supports my not go out of the template.


My? is that spelling mishap or is it supposed to be like that.
i put the laughter in manslaughter!

Post November 23rd, 2009, 3:09 pm

Posts: 3153
Points on hand: 2,837.21 Points
Bank: 6,969.69 Points
Is that really significant to the meaning of that phrase? Anddd is it not very obviously a typo?

PreviousNext

Return to Contests

 


  • Related topics
    Replies
    Views
    Last post