Wyvern - B&M Hyper

Well, due to computer issues and such I have been away from NL for a good while. I finally got the issues resolved, so now its time to start plugging away again.

I know its not much, but here is a shot of whats up so far.



More updates coming soon.

[AyTrane]

The start of that first turn looks like some heavy G's, then they loosen up. Is it the angle, or are they consistent?

I'm pretty sure its just the angle. I test rode it to double check and the highest g's it hits is 3.5, and thats not until the middle of the turn.

I like it. The only thing I see that has a chance of being off is the lift crest. Is it too wide, or is it just me? Otherwise, the drop shaping looks marvelous. Is it handbuilt?

No, newton2. And I agree with the lift crest being messed up. I hadn't really messed with it since it gets messed up when I import my newton element, but now that the track up to the mcbr is done I am working on it. Thanks for the comment.

Well, in that case, VERY good job on the drop. Force-based B&M drops are really hard IMO. And I'm glad to hear you're working on the lift again. That'll make the ride just that bit better [:D]

Colors are inverted, obviously. The brakes before the turn around before the 2 sets of final brakes is going to be a water splash section.

O_o me likey....haha but seriously, it looks like a great layout. How are the forces in those turns? They look sort of weak (especially the last turnaround after the splash), but it could just be my perspective.

Most of the turns pull between 2.9 and 3.5 g's, except for the last one which is really weak(like 1.5gs) because I was having a really hard time getting it to line up properly so I could get it back to the station smoothly.