Dueling/racing Intamin Woodie UPDATE 12/26/10

I just started the other side. Its the exact same, but the turn is opposite. The tracks will go down right next to each other down the drop and then up through a station flyby and then into a hill or two. Then they will have turnaround like El Toro each, lunging at each other. Then they will both ride up into an MCBR. After the MCBR, they will dive into a steep drop and then go through several low to the ground turns like El Toro except criss crossing on hills and swarming at each other.

[Coasterkidmwm]

Originally posted by dcs221

Just because you study something doesn't mean you have to inject it into every conversation. What you said is irrelevant because he's not looking at or commenting on one specific and relatively minor aspect of nature.

5 years.

Cool story, bro.

joasters, is the turn at the top wide enough? I made an Intamin woodie a little while ago and my first turn was about the same radius as yours, which turned out to be a tad too tight. Just make sure it's proportionate.

^The Lateral G's are 0.3 and the lift speed is 13 mph. I think its fine.

It's not so much about the G's, rather shaping. Remember, everything is shaping, and it may be a tad too tight. It's not very hard to fix that, and it's not like HSAK where you have to create, wait, save, load, and repeat to get the right radius. I agree with Boneplaya, because I did the same thing.

I am looking for testers.

lol, I think you may be the only person who cares that I studied mechanical engineering for 5 years. Certainly doesn't bother me...in fact, that was my choice. Also, no employer including GCII has inquired about it, so what you said before does not apply.

What I said about your statements was relevant to what you said, and your last two posts were both pointless and irrelevant to me or any other discussion in this thread. Guess that 5 years helped me learn some common sense. Have a good evening.

Originally posted by dcs221

lol, I think you may be the only person who cares that I studied mechanical engineering for 5 years. Certainly doesn't bother me...in fact, that was my choice. Also, no employer including GCII has inquired about it, so what you said before does not apply.

I see what you did there.

So can any of you test?

Send it to me tomorrow.

Originally posted by fear the four

Send it to me tomorrow.

kk

I'm up for testing

Originally posted by rcking04

I'm up for testing

what is your email?

[Coasterkidmwm]

Originally posted by dcs221

lol, I think you may be the only person who cares that I studied mechanical engineering for 5 years. Certainly doesn't bother me...in fact, that was my choice. Also, no employer including GCII has inquired about it, so what you said before does not apply.

Weak rides attract weak employees. Besides you could apply to them with a 2.1 GPA and they'd still have to consider you because of affirmative action.

hahaha you're stupid. hahahaha

Update!

I have made the station fly-through, even though its not close enough to the station to be a fly though. It will be more of an inside que-building fly-through.




So far, the max vertical G's are 3.8 (not sustained very long), the minimum Vertical G's are -1.1, and the Maximum Lateral G's are 0.5 (sustained only for a bit when going around the turn before the drop)

Please tell me what you think.


- Jcoasters

i think it looks like a vagina

Originally posted by A113

i think it looks like a vagina

It doesn't look icky.

Originally posted by A113

i think it looks like a vagina

in a bad or good way?

[hyyyper]

Isn't it a bit early to do a flythrough? It'll be gone in half a second. If you put it more towards the end of the layout, the speed will be reduced so the riders can really notice it as a flythrough.

Originally posted by hyyyper

Isn't it a bit early to do a flythrough? It'll be gone in half a second. If you put it more towards the end of the layout, the speed will be reduced so the riders can really notice it as a flythrough.

true but i like it. its only going about 50 mph anyways and it long, if i remember a 20 or 25 meter segment

[Turbo]

the bottom of the drop looks a little off

Originally posted by Turbo

the bottom of the drop looks a little off

it rides just like T Express, which was my goal.

Originally posted by Turbo

the bottom of the drop looks a little off

My thoughts also.

Could I maybe test,I`ve ridden Collosos 5 times(yes not that much,but I was only 2 days there and the lines were huge.