Aventador Revisit

[Goku1910]

When I was trying to come up with which ride I wanted to do a "No Limits 2 Edition" I came to the conclusion that there were no other NL1 rides I made that were worthy of a touch-up and hours of 3D work. It then dawned on me that my first No Limits 2 Coaster didn't get the Station and Queue treatment that so many others did. So this is my first revisit to a NL2 ride applying my new building skills and 3D modeling with my obsessive attention to small details. I'm also taking this opportunity to edit Aventador from the Stengel Dive and onwards. I didn't like my old 2nd half of the layout much at all and figured it needed to be scrapped. I still consider this a revisit instead of a re-do because I didn't scrap everything.

If I revisited say...Carrion it would be a re-do because there's nothing good about that one.

So here we go. Let's check out Aventador, The Revisit!

[Goku1910]

I typically don't like to double post but I posted a large update to Facebook.com/greenbulletproductions but what I really came here for was to show you this:

https://imgur.com/a/l3cNo

This album contains screenshots of Aventador's nearly completed 3D object collection.

EDIT: New link, the other is broken! https://imgur.com/a/4hE24

[mkingy]

3DS look excellent! My only comment of improvement would be to create a bit more of sturdy support structure for the path over the water splashdown. Perhaps thicker columns or more of a lattice structure would work.

[Coasterkidmwm]

Theming and atmosphere you've set up and put into the area looks fantastic! I like the curved path over the splashdown

In the station, I think there is to much space between the station entrance and the boarding aisles. Maybe you could add a maze queue, possibly including a front row queue?

[Goku1910]

skyscraper wrote:

In the station, I think there is to much space between the station entrance and the boarding aisles. Maybe you could add a maze queue, possibly including a front row queue?

I plan to do this for the first row at least. The ride and model is complete for the most part but these rails should only take a few minutes.

mkingy wrote:

3DS look excellent! My only comment of improvement would be to create a bit more of sturdy support structure for the path over the water splashdown. Perhaps thicker columns or more of a lattice structure would work.

I wanted to, but the rails on the side of the path limited my ability to do this. I decided to just stick with it. In a later revision I may edit this.

Edit: I found a way to make it work but it takes a lot of line drawing to make wider beams.
In the image below all the vertical beams have been replaced but the arches are in progress. Whether they go to the water or not I'm still undecided on. The front arch has not been started.

[Goku1910]

Coasterkidmwm wrote:

Theming and atmosphere you've set up and put into the area looks fantastic! I like the curved path over the splashdown

sketchup add-on called upright extruder makes this a lot easier. I first used it for the midway bridge for Zekken to reach the station. I took it to a whole new level with this one but the transition from going upward to left/right was tricky. I say left right because the bridge was built in two symmetrical halves then combined.

[Paradox]

The link you posted to your Imgur album seems to be broken

[Goku1910]

Paradox wrote:

The link you posted to your Imgur album seems to be broken

Try this: https://imgur.com/a/4hE24

[Paradox]

Looks really good!

[mkingy]

Yeah that's a decent solution I think

[Goku1910]

The YouTube video is live. I'll have it up on Steam workshop and CC Exchange within the next few days. Check it out in all of it's 4K glory:
(My typical stalker trolls are hitting it hard with dislikes, do me a solid? )

Love the Zierer-ish look of a B&M train! Maybe the train length has me thinking so! Regarding the layout, it's wild!