Wood supports. What Id like to see.

I would like to see the wood autosupoter have an adjustment for the density and "heavyness" of the supports

yeah, and the "boxes" of supports are 10ft.x10ft. when in real life they are 6ft.x6ft. The size of the large wooden beam is also way too large, it would be almost the size of a tree trunk in real life!

IntaminFan... Look at Real Wooden Coasters again...

Buster.

I did, they are between 6ft.x6ft. and 7ft.x7ft., just divide the number of boxes there are by the height of the coaster.

Oh, I was confused by the way you presented the numbers. So, what you mean is the height of one story should be 6ft instead of 10ft. When you said 6ft*6ft I thought you were talking about the layout as seen from top.

Anyway. By looking at different coasters I came to the conclusion that the height of one story varies between 6ft and 10ft. From above the bentposts form a square of 10ft*10ft (just like they do with the woodbuilder. So, the only thing that sometimes might be wrong is the height of one story. However, I think it's good that they are at 10ft (like many real coasters too, mind you) as to reduce the overall amount of supports and therefor guarantee higher fps.

The dimensions of the wooden beams themselfs is about correct.

Buster.

They're 10ft x 10ft in RCT2, too.

the supports should be bulky, but they don't seem to bother me

What I really miss is the option to Cut and paste supports and track elements. Hope that feature is added in the future.