I got everyones track turned in [:D]
INSTRUCTIONS
You must go through 6 of the 11 rings here. You may not move them around, you may not enlarge them either. there's enough room in them to go through with enough clearance, at least it seems so [;)] You also have to use those 3 mid course brakes, You cannot move them or alter them. You may add wheels to them but not have the wheels accelerate the train past the speed it would pass through without the wheels. Also maintain your vertical g's below 6, your negative g's below 1.5 and you lateral g's below + and - 2.0 Also you minimum height has to be 125 feet, your max height can be whatever you desire. Minimum 3 train operation with 6 cars each, meaning you can have more than 3 trains if you wish. You must also do all your track inside the outlined box which is 250 feet by 250 feet. Your supports have to be inside the box as well. 3ds can be laid outside the box and the track style has to remain: B&M Inverted 4 Seat Across
Oh yeah, you can move the station anywhere you want and you can have more midcourse brakes if needed and prestation brakes.
TEMPLATE
http://www.coastercrazy.com/users/wws/round2/round_2.zip
place the round2 ring.3ds file into your objects folder and the template open it up after placing the ring in the objects folder.
by the way you will have to use the break segment feature a lot to build your track. So if you don't know how to break a segment, ask and I'll post pictures for ya.
Good luck to everyone, this one is a tad harder in some aspects than your previous one.
WWS