Trying to get back into NL2 after a couple of years absence - I have a simple track (most of mine are as I experiment to relearn things) that has a simple 2-piece saloon type door that opens as the train approaches. However the realism is a bit of a fail as the door does not open quite in time and b...

Thank you Mikey quite correct bit of a hunt though but got it and am now up to 2.5.0.5 thank you.

Just got back to playing with No Limits 2 after extended absence but got v2.1.5.0 loaded and after a few hiccups got things sort of working and old tracks running as I remember them. Thinks..... updates must have happened during my absence so tried checking for updates and all I get is "Cannot ...

Ok Oscar - you hit me at a vulnerable moment and $10 is on its way to you - don't know what thats cost me in UKP but I guess paypal and my credit card will sort it out - they usually do. Just keep up the good work - and thats an order :D You and the site have helped me out as I got to grips with NL2...

Hopefully the new site won't suffer this pain?

Do we get seaching on the new site?

Thank you. I edited the nl2sco file in notepad and just removed the path between <preview> and </preview> then saved it. Went into NL2SCO editor and opened the object - and as expected no preview pathname was displayed. Clicked the (...) button and pointed at my new jpg I wanted as preview image and...

We are told to keep all modified lights scene objects etc in the park folder rather than litter the installation folder - which is all sensible advice. It seems the editor only permits working within the confines of the installation folder set and will not allow the selection of other folders (like ...

Ok - panic over - after further experimentations - I learn that halo is dazzle, only visible when looking into the spot and volume (what I thought was halo) is best described as the scattering of light photons as like when passing through fog, visible at all angles. [:I] Now I'm successfully control...

Have noticed that when passing through spotlight halo - motion momentarily slows down (obviously due to extra processing involved) but how do we remove the halo effect? When editing the light there is both a tick box for halo effect and an intensity box, but neither seem to work as expected. I have ...

This is a post - get thru ok?

Purely a initial development anomaly. You're getting the speeds and G forces sorted and sometimes you'll violate all sorts of parameters as you progress towards a comfortable and survivable ride experience.

So, not intentional, it just happens.

Mmmmmmmmmmm - yes I can see something valid in that explanation in the real world - and yes I appreciate NL2 is doing its best to be in the real world - but not thinking down that avenue when confronted with the original effects threw me off the scent. But by the same token, if you zoom through a st...

Problem cracked - I found a bug - please see my topic

http://www.coastercrazy.com/forum/topic.asp?TOPIC_ID=32529

Thanks to all who scratched their heads over this.

SOLVED !!!!!!!!!!!!!!!!!!!!!! After much digging and experimenting I can make the following statement with some confidence. If you violate a "complete stop" brake, all remaining brakes in your ride will malfunction. That simple. This is clearly a bug. If you violate any brake it should only lumber y...

Just reduced the length of the pre-station brake to the extent that it now fails to completely stop my 64mph train, and now it reaches the station, and the station brakes just stop the train with no attempt to stop it gently and it now comes to a complete halt well before the designed stop position ...

Nope - its Closed circuit mode as it should be. Going to do some experiments with brakes etc and creating more blocks just to ensure I have not inadvertently violated anything. But this does only have one train so not sure I will learn anything. Am also emailing this problem to nolimits themselves, ...

Scripted mode? How would I know if I were? not that I think I am, intentionally anyway.

Observation: this is looking very similar to the problem I reported in the "Broken station" thread, altho I have not yet noticed if the station is malfunctioning as I have this failing brake block in the way.

Yes my setup runs all the supplied tracks perfectly.

I have not tried adjusting anything - the settings of the brake block should cause the brakes to release at 20mph and they do not.

There is only 1 train on the ride.

Yes it is a complete circuit.

Why does my train come to a complete stop when it reaches this brake section? Image Insert: http://www.coastercrazy.com/forum/file_attachments/alanr/20142119554_NoLimits1.jpg 54.68 KB It arrives at the section at about 65mph and comes to a complete stop about 3/4 of the way through.

Well if you have subscribed to any topics you should be receiving notifications of new replies. Try this topic - it seems to be getting quite a few recently.

Did you get an email for this reply? Are you subscribed to this topic?

Also of course check your profile to see if it looks correct.

Will the new site have a search function?

I saw a post a while ago where there was a description of how to make 2 stations merge into one with two tracks passing through, and I'm darned if I can find it now. If the poster reads this - where was it?

Talking of the switch over - are we satisfied all the posts, uploads photos and things will move over successfully? Only ask as another popular web site did a swap some years ago and for some inexplicable reason lost all the links to all the photos - and posts that had carefully described processes ...

Mmmmmmmmmmmm sweet [8D]