Moonsault Scramble - A Thrillnetwork NL Staff Production
-------------------------------------------------------------
Before you ride...
*The ride is supposed to pull 6.2 G's
*Yes it goes that fast through the pretzel loop
*No it is not heartlined
*Yes the chain lift is that slow
*The spikes are not supposed to be straight like on a Vekoma boomerang
*70M does not equal 207 ft like many websites say, it's really around 225ft, I found a sketch of the ride showing the dimensions for everything except the height of the pretzel loop, which I had to eyeball. Setting the rides height to 207ft did not give the desired G results needed to make it realistic, so I went with what the sketch said. The ride is exact in length (base length, not track length), width, and height. Meisho designed the coaster, while Vekoma supplied the trains, track, and basically of the parts.
*I know the station has no entrance or exit, I made the little white thing so then the other station wouldn't be such an eyesore, 3Ds is far from my strong point, so please be nice.
------------------------------------------------------------
Ride Statistics
Manufacturer: Vekoma/Meisho
Trains: 1
Cars Per Train: 7
Height 70M
Speed: 71mph
Length (track): 1703ft
Inversions: 4 (Pretzel Knot forwards, Pretzel Knot backwards)
-------------------------------------------------------------
Special Thanks to:
Chip - Testing
Alex T - Testing
Kyle L - The supports, testing.
Meowcoaster - cartexture
Tia and Buster - The tools they created
Everyone - listening to me complain about the pretzel loop.
--------------------------------------------------------------
Work that I did not do, everything else was completed by me:
Kyle L - Any supports that are not curved
Meowcoaster - cartexture
T - From every picture I have seen, you have captured this coaster's essence like no one else. The pretzel roll was darn near perfect (save some bumping and minor pumping), but even these types of trains cannot be perfect. The supporting is also right on the line. Nevermind the "peripheral" stuff (3Ds and the like) as they only add to what is already there, IMO -- very nicely pulled off.
A - This is just about right according to the stats, but I felt the hold on the lift might have been just a tad too long ...
O - Again, a near perfect recreation with some issues of course in what is there and what you have .. but not bad overall. Nicely done.
this ride was perfect, i cant give u all tens just because it isnt that hard to recreate, it was extremely smooth and the g's were amazing, awesome re-creation, keep-em-coming.
Okay firstly, very good recreation, although i am not giving over 8.5 as it isnt a very long track to recreate.
Technical, very good, smoother than the original, the pretzel knot on the original had a slight bump on the lead out, but you managed to make it smoother, although that puts down accuracy a little.
Adrenaline was nearly exactly like the real thing. This would be a track where i would actually get really scared. That first hill is so slow (exactly like the real one) building up as much anticipation as possible. Then the pretzel loop is taken so fast!
Accuracy, well i have already explained in the adrenaline. Very good. Supports were very accurate too!
Well done on the creation.
JPECOOL
That's the best re creation of this ride i have seen in ages! You really got the g forces to hit the right spot and they did. Also the batwing was shaped perfectly and it was very smooth too. 3ds were of a average quality but everything else was good.
this was fantastic man. i liked the supports, very realistic. and the batwing was the best ive ever seen. almost PERFECT. also the 3d's added a nice feel to it.
NOTE--pumpmeup i think you need to change your rate. you forgot to realize that it was a recreation.
woah sry i had no idea that this was a recretion! sry about the under rate i didnt know it was a recreation but yes u did put a lot of work into this so nice work
Home
Contact Us
Login
Register
Store
Exchange
Browse The Scrapyard
Forum
Donate
