New Windows 7 - NL Problem

[A7]

All appears to go well when it comes to recording videos, however the videos turn out very f...ed up. I viewed the original AVI in VLC, a WMV version in WMP, and a MOV version in QT. All turn out the same.. So it is not a problem with the viewers, it is obviously left at being a compatibility issue with NoLimits. Changing quality settings, resolution, frames a second, different coasters, "Compatibility Mode" (Vista and XP), etc..

I'm running the latest Windows 7 Ultimate 64-bit release.

86 or 64? I'm running 86 and haven't had one compatibility problem, even with recording.

Im running Windows 7 Ultimate 64Bit, but i cant test cuz im on a laptop and i dont have a numberpad 0 key :/

you can change the controls you know...

[A7]

Hazbruv: It is 64-bit, or x64
Casper: You didn't know you can re-assign keys in NL?

Hmmm, x64 has lots of issues with NL, I'm not quite sure how you can fix them though, sorry.

EDIT: Try filming in a different resolution.

I have Windows 7 Professional x64 and don't have a problem with record video...Not sure what could be your problem.

cp-soad : I can? how? lol

[A7]

HazBruv: I've already tried different resolutions, please read my first post..

EastCoastn07: I am not sure how different the Professional version is from the Ultimate version of Windows 7, but I am assuming they are very different since you don't have this problem.

Casper: Open Simulator, Click the Settings option, Then click the Controls option. You can re-assign keys in there.

-- edit --

Fraps doesn't work correctly either with the NL Simulator.
Resolution and Length of the video are intact.
Picture is pure black, and there is no sound at all.

Originally posted by Casper

Im running Windows 7 Ultimate 64Bit, but i cant test cuz im on a laptop and i dont have a numberpad 0 key :/

Use the key marked "FN". Then while holding that, press the "M" key. it will act as the numberpad "0" key.

@cp-soad , lol thanks, i cant belive i overlooked that

@Tetsu, yeah i know that, but since iv reformatted my laptop its not doing that anymoe

anyway, tested, and it workes perfectly

Try changing the amount of FPS the vid records in?

if not, solution to most problems, update ur graphics card drivers

[coolbeans326]

what the hell is 86?

run it as 32bit and tell me how that goes

x86 is x32, same thing.

I'm having W7 x86 and it's just working fine... I think it's just an issue with 64bit Windows 7... Otherwise, use Fraps...

@coolbeans: isn't possible

I've had no problems taking video in Win7 64.

Originally posted by TylerE

I've had no problems taking video in Win7 64.

what are his PC specs might be a problem with that

Have you overclocked anything?

Mild overclock on the CPU, video card is running at stock settings.

Originally posted by TylerE

Mild overclock on the CPU, video card is running at stock settings.

Overclcok wouldn't change the way a software functions. I have running on Windows 7 64 bit just fine without any overclocking and recording works fine.

[A7]

Casper:
"Try changing the amount of FPS the vid records in?", I've already done that.
"if not, solution to most problems, update ur graphics card drivers", I'm currently running the latest one.

coolbeans326: I've already stated that compatibility mode does not work.

field33P: I've already stated that Fraps does not work either.

TylerE/HazBruv/field33P:
CPU: i7 940 OC from 2.93Ghz to 4Ghz
GPU: (2) Sli GTX 260's OC from 576, 1242, 999, to 720, 1500, 1350
RAM: 6GB Triple-Channel Corsair Dominator OC from 1600Mhz Cas9 to 2000Mhz Cas7
-- Removing these overclocks did not fix the problem, so I have since re-applied them.

blackhand1001: Your statement made me think that maybe my install of NoLimits went wrong somewhere. So I just re-installed it but unfortunately no luck. Is your version of Win7 the Ultimate version? Also, does it have all the latest updates?

Try pulling the raw avi into Windows Movie maker.

you do realize that windows 7 you have was just a trial version, and not the final product right?

Iv got the Win Ultimate RTM, so it is the final one. Not sure what cp-soad is running...

Does it say a version number and product evaluation in the bottom right hand side?

[A7]

TylerE: That does nothing.

Jms10391/Casper: It is the RTM 7600 build.

Originally posted by cp-soad

TylerE: That does nothing.

Jms10391/Casper: It is the RTM 7600 build.

might be just a problem with your installation, becouse I use RTM 7600... What nolimits version btw? 1.6 or 1.71?