Florida Adventure Theme Park and Resort

[afro85]

Looks fantastic... The supports too!

afro85 wrote:

Looks fantastic... The supports too!

Thank you very much! I created a small coaster and supported it to get a feel for supports and then I moved on to this. Glad you like them I stayed up till around 3 am finishing the supports. lol

Love how you made fencing around it

ok we are choosing a name so we want you to decide if you have a idea of the parks name we will consider the name then do a poll

[afro85]

Call it Steel Mania

Update: October 6,2014

I have added another coaster named Voodoo to the French Quarter section of the park. It is a mini launched euro fighter.

Stats:
Name: Voodoo
Type: Euro Fighter
Launch Speed: 28 mph
Inversions: 1 (corkscrew)
Max Height: 76 feet

I have finished supporting Voodoo and enclosed it within a 3d fence. I still have to finish fencing Mardi Gras and the parking lot. I have also started working on some 3d signs and you will see them on the fences surrounding the coaster. Deere and I are planning to add some flat rides to the area of the park and then we will move on to work on the kids area of the park. Please let me know what you think of the park. All feedback is greatly appreciated!

-Blase Rhine

Looking great anyone have idea for names?

UPDATE: October 7th, 2014

-I have begun working on the coaster for the Kiddie area of the park. I must say it is harder than I thought... I have to pay close attention to banking, speed, and height. I am modeling the coaster after Flying ACE Aerial Chase http://rcdb.com/1037.htm#

-I also drew the layout of the park ( I'm no artist so don't judge lol) so you all have an idea of what we are going for. I am planning to change the Gotham City Section to DC Universe, and the unnamed area is going to be split into 2 areas, A kiddie area and a NASCAR themed area that will feature a launch coaster.

Supports are not final at all! I am probably going to go back and redo all of them so far and model them more like the ones from Flying Ace.


The coaster reaches a top speed of 35 mph and is 72 feet tall. It does not feel fast at all and all of the G stay in the green range with the highest at around 2.7 G's


Also the inspiration for the park comes from a mix between Cedar Fair and Six Flags.

P.S. Thanks to Gouldy for the Picture Icon

[afro85]

Doing a great job! I envy your free time!

It takes me several months to find the time to work on two rides, and you can bring up an entire Park like it's nothing. Tell me your secrets

Ya he makes it so fast and so good he's the next codemaster

[afro85]

I love how the project is going but TCM is not just fast and good... His knowledge is really impressive for his age!

[gouldy]

Cool, the icon looks pretty sweet on the forums! Glad you liked it.

Also, monitoring this thread with interest!

RCT3rox wrote:

It takes me several months to find the time to work on two rides, and you can bring up an entire Park like it's nothing. Tell me your secrets

Haha not really a secret but I do online school so I have much free time during the day. I also travel back and forth from South Carolina to Georgia so I have around 4 hour car rides to work on it in the car. lol

I am going to work on some more 3d modeling. It would be much help if we could get another person on this project. Someone who can model full buildings (mostly for the French Quarter section). I can do signs, billboards, gates, fences, etc. just not entire buildings yet. so if anyone is willing to help it would be greatly appreciated. Also after talking to Deere we have figured that this project with all the work to be done won't be released for a long while... We still have MONTHS of work to do. Our plan is to make this park as complete and realistic as we can.

-Blase Rhine

[TTD03]

Really cool stuff!

Something will blow you away tomorrow

UPDATE: October 10th, 2014

Forbidden Forest (this coaster was heavily based upon Verbolten)

Story: You board your automobile for a nice scenic drive through the Enchanted Forest. As your car is going on a nice scenic route it quickly turns and launches you into the deeper and darker part of the forest. The car then slows down and drops and then launches again even deeper into the Enchanted Forest. As the automobile frantically tries to escape the Enchanted Forest it tunnels into the ground and launches again trying to escape the Forest. It then finds safety at the Final brake run just before the station.

Ride Details: Uncover the truth about the Enchanted Forest as you travel 50+ mph through 3 launches, flying past trees, and traveling through dark tunnels. Board our automobile for a tour of your life. 48 inch height requirement.

Stats: 55 mph+
Inversions: 1
Launches: 3 (1 underground)

Forbidden Forest is based on a family friendly ride that has everything, hills, drops, launch, and an inversion. Of course I am going to add more trees and tweak the supports more. The coaster is clearance tested and passed without any issues. All of the G's stay in a comfortable range. Please keep in mind that this coaster is still a WIP.

I have also come up with a name for the kids Invert coaster, Grover's Gliders.
Grover's Gliders- Take a trip with Mr. Grover on his wonderful machine, the Glider. Children above the height 36 inches will board a Glider and experience the thrill of flight!

I am also looking for help on Forbidden Forests's custom station. If anyone is willing to build a Que line leading up to a station please PM me. I will give you full credit for your work. Thanks it is greatly appreciated!


Please Let me know what you all think so far/what I can improve/ suggestions for the park. Thank you!

-Blase Rhine

looking great blase

Okay so sorry for the lack of updates but over the weekend I went to Fright Fest at SFOG (which wasn't all that great... way to many people, not enough scare actors, the haunted houses had hardly no special effects, etc.) so I have not had much time to work on the park. I am planning on condensing the park instead of making it so spread out. Expect an update later tomorrow Thank you all for keeping up with this thread!

-Blase Rhine

The Intamin Mack has the wrong support connectors.

There is no intiniam yet

[Turbo]

The Mack has the wrong support connectors.

What is with all of the Mack launches all of a sudden? It seems like making one is the cool thing to do now XD

I made LiveWire because I asked you guys if I should make a Mack Launch or an RMC, and you guys picked the launch . So I guess it's just the thing everyone wants to see!

We choose the Mack because it looks closes to a car