Home
Contact Us
Discord
Store
Exchange
Forum
Board index ‹ Roller Coaster Games ‹ Hard Hat Area ‹ The Big Zit (NL)
4.6 and 4.6 (both times)
The last hill gets to about -1.6/-1.7.
The Big Zit (NL)
39 posts
• Page 2 of 2 • 1, 2
March 28th, 2008, 2:47 pm
not to be the odd one out, but i actually like the look of this. Maybe not the simple left to rights then into brake, i would do a higher (half the height of the tophat) S bend hill, with some sweet neg G's. Just another element so its not ALL tophat. What are the positive G's entering/exiting the hill?
I think the style of supports on my coaster XRC would be appropriate if you have the time: http://www.coastercrazy.com/track_excha ... ?tid=12534
Originally posted by TheArchitect
not to be the odd one out, but i actually like the look of this. Maybe not the simple left to rights then into brake, i would do a higher (half the height of the tophat) S bend hill, with some sweet neg G's. Just another element so its not ALL tophat. What are the positive G's entering/exiting the hill?
not to be the odd one out, but i actually like the look of this. Maybe not the simple left to rights then into brake, i would do a higher (half the height of the tophat) S bend hill, with some sweet neg G's. Just another element so its not ALL tophat. What are the positive G's entering/exiting the hill?
4.6 and 4.6 (both times)
The last hill gets to about -1.6/-1.7.
-1.6 is too low.
Then should I use a trim on the down (or up) part of the hill?
Design it so that there is no need for a trim.
I fixed it, and it is now AT MOST -0.7. Sweet
Plus, the transition into the brakes is much smoother.
Testers?
Testers?
That looks like way too much support...
X2 ??? Intimidator 305 ??? Millennium Force ??? Iron Rattler ??? El Toro ??? Fury 325 ??? Maverick ??? Skyrush ??? Twisted Timbers ??? Voyage
250
250
The head of the element looks engorged.
Also hw fast does it go over the top? You know in real life you need to be able to have speed vary a bit unless you want more rollbacks than Kingda Ka and TDD combined.
Also hw fast does it go over the top? You know in real life you need to be able to have speed vary a bit unless you want more rollbacks than Kingda Ka and TDD combined.
"Careful man, there's a beverage here!"
As long as you change the colors...
Also, I would be willing to test if you still need help.
Also, I would be willing to test if you still need help.
1-Millennium Force | 2-Intimidator 305 | 3-Fury 325
4-Skyrush | 5-Iron Rattler | 6-X2 | 7-Kingda Ka
8-Voyage | 9-Maverick | 10-Monster
161
4-Skyrush | 5-Iron Rattler | 6-X2 | 7-Kingda Ka
8-Voyage | 9-Maverick | 10-Monster
161
Looks interesting, I'm curious to see how smooth that top-hat will run.
^ Made by FVDs
^^ Maybe I will.
^^^ About 20-ish mph (MAX -1.2 gs (back seat)).
^^^^ Those supports are to make sure that the g-forces will not destroy only a few of them, so I need a lot. As you will see in the editor, the straight sections on it have a lot less of them than the helix there.
-EElover2
Expect this to be released in a couple of days.
Also, it runs 4 trains of 3-car X-car trains very well and consistently.
^^ Maybe I will.
^^^ About 20-ish mph (MAX -1.2 gs (back seat)).
^^^^ Those supports are to make sure that the g-forces will not destroy only a few of them, so I need a lot. As you will see in the editor, the straight sections on it have a lot less of them than the helix there.
-EElover2
Expect this to be released in a couple of days.
Also, it runs 4 trains of 3-car X-car trains very well and consistently.
39 posts
• Page 2 of 2 • 1, 2